TECHNICQLL UNIVERSAL SILICONE CLEAR 20ML S-072

Name: TECHNICQLL UNIVERSAL SILICONE CLEAR 20ML S-072
Brand: TECHNICQLL
SKU: S-072
Price: 8 PLN
Availability: InStock

zł8.00

Tax included

High-quality, one-component, universal polysiloxane-based silicone with acetate curing system. It forms a permanently elastic joint, resistant to weather conditions.

Available in 24 hours

See on Allegro

Recommended for filling cavities in silicone
Creates a smooth and glossy grout
Flexible, does not crumble or crack
For interior and exterior use
Weather, moisture and UV resistant

Materials: glass, metals, wood, plaster, brick, plastics, ceramic, stone, gypsum board- cardboard, polystyrene foam

Application examples:

Sealing joints between materials construction materials, a elements finishing elements
Sealing of store windows, display windows, counters, showcases, signs, boards, coffers advertising, etc.
In the household for repair and hobby work
Sealing of boats, ships, cars, trailers kemping trailers
Sealing doors and windows
Grouting ceramic tiles

Consistency: tixotropic paste
Density: 0,95-0,99 g/cm3
Dry to touch (23°C, 50% humidity): 25 min.
Full curing time (23°C, humidity 50%): 2mm/24h
Temperature resistance: -40°C - 120°C
Temperature of application: 5°C - 30°C

Working conditions: pflares perform at ambient and substrate temperature from 5°C to 30°C.

Surface preparation: the surfaces to be glued should be clean, degreased and dry.

Application
Grouting/sealing:

Apply masking tape on both sides of the adhesive surface to ensure even
edges.
Apply a small amount of silicone and smooth with a spatula soaked in water with a small amount of
amount of soap.
Remove the masking tapes after about 10 minutes.

Mounting/joining:

Apply silicone in spots ( at intervals of 2-3 cm) on one of the surfaces to be joined surfaces.
Tighten the joined parts.
o Moisture in the air is needed to cure the silicone, so do not
therefore do not press too tightly on the parts to be bondedso as to leave space
w for air flow between the silicone.
Leave for 24 hours for the joint to gain full strength.

Tips:

W ensure adequate ventilation during bonding operations.
When gluing objects to vertical surfaces, prepare in advance an appropriate length supports to immobilize the object for the drying time of the silicone (24 hours).
Recommended joint size [mm] (width x depth): 4-8 x 6; 10-12 x 8; 14-16 x 10; 18-20x 12; 22-24 x 14. The minimum joint width is 4mm, and the maximum is 25mm.
Do not use for connectionsjoints with Teflon, PP, PE.
Do not use for PVC, concrete, plaster, marble, acrylic, corrosion-sensitive metals: lead,zinc, copper, iron, and for sealing aquariums and for bonding mirrors.
Avoid contact with secondary sealing in glass windows insulating glass units, as well as with glass laminated (especially applies to edge contact).
Fresh dirt can be removed with soapy water or extraction gasoline, while after cured with a knife or spatula.
At temperatures above 120°C the silicone undergoes destaining.
Do not wet the substrate or silicone layer with water.